08-10-2022 Steady Rests
Today’s discussion gave information and advice on using steady rests for different types of projects when turning. A list of vendors, video resources and books that give more information are listed after the notes for this session. The group observed a variety of...
07-13-2022 Burls
Several members had not previously used burls when making woodturning projects. Today’s discussion gave more information about using them. Scientists have speculated that burls may be caused by stress on trees due to mechanical injuries or insects or by a bacterium...
06-07-2022 Maintaining Tools
Today’s discussion gave tips on maintaining tools to limit repairs and have more time for woodturning. The notes include suggestions for a variety of tools in the shop. A list of resources for more information is included at the end of the notes.The Lathe One member...
05-11-2022 Dust Collection Part 2
The discussion today was a continuation of the dust collection information from April 2022.Jerry ShugarsJerry has a small shop where floor space is at a premium, so his usual system is the best way to collect dust: with a broom and dustpan, which he’s quite qualified...
04-13-2022 Dust Collection Part 1
Today’s discussion was about the ‘elephant in the room:’ Dust! It’s the biggest health concern when turning wood. Dust is not only bad for our lungs. It also causes problems by coating everything in the shop and makes finishes gritty. Many photos were contributed for...
03-09-2022 Carving after Turning
Today’s meeting was about carving and it was introduced with the question: What experience do members have with carving? A few have done some surface embellishments or done some texturing with Dremel tools or wire brushes. Most had carved Thanksgiving turkeys. One...